git.gniibe.org/chopstx/chopstx.git
5 days ago NIIBE YutakaFix calculation of ticks remained. master
6 days ago NIIBE YutakaChange behavior of chopstx_poll to correctly update...
2018-11-12 NIIBE YutakaVersion 1.12. release/1.12
2018-11-12 NIIBE Yutakaackbtn driver: Add possible FST-01 and FST-01G support.
2018-11-09 NIIBE YutakaAdd eventflag_set_mask, removing eventflag_wait_all.
2018-11-09 NIIBE YutakaAdd eventflag_wait_all.
2018-10-02 NIIBE YutakaVersion 1.11. release/1.11
2018-10-01 NIIBE YutakaFix ackbtn clearing the edge detector.
2018-10-01 NIIBE YutakaFix interrupt handling.
2018-09-29 NIIBE YutakaVersion 1.10. release/1.10
2018-09-27 NIIBE Yutakadoc: Update chopstx-api.texi.
2018-09-27 NIIBE YutakaMinor change for ackbtn driver.
2018-09-27 NIIBE YutakaAdd ack-botton driver.
2018-09-26 NIIBE YutakaFix examples.
2018-09-26 NIIBE YutakaNew API: chopstx_intr_done.
2018-09-25 NIIBE YutakaAdd defninitions of EXTI use for FST-01SZ.
2018-09-21 NIIBE YutakaConsolidate definitions for STM32F103.
2018-09-21 NIIBE YutakaAdd FST-01SZ support.
2018-08-23 NIIBE YutakaAdd MHZ for examples.
2018-08-20 NIIBE Yutakausb: Fix for ZLP.
2018-05-09 NIIBE YutakaVersion 1.9. release/1.9
2018-05-08 NIIBE YutakaFix flash_protect for GD32F103.
2018-05-08 NIIBE YutakaFix for Blue Pill, wait using MHZ.
2018-04-26 NIIBE YutakaFix example-fraucheky.
2018-04-26 NIIBE YutakaFix usb_device_reset of example-fraucheky.
2018-04-26 NIIBE YutakaAdd board/board-blue-pill-g.h.
2018-01-30 NIIBE YutakaMore.
2018-01-30 NIIBE YutakaMore update of CI/CD.
2018-01-30 NIIBE YutakaUpdate CI/CD setting to generate HTML.
2018-01-30 NIIBE YutakaAdd .gitlab-ci.yml.
2018-01-19 NIIBE YutakaVersion 1.8. release/1.8
2018-01-18 NIIBE YutakaClean up example-usb-serial.
2018-01-18 NIIBE YutakaFix mcu/stm32f103.h.
2018-01-09 Anthony RomanoSupport IN8 config for ADC.
2017-12-19 NIIBE YutakaVersion 1.7. release/1.7
2017-12-18 NIIBE YutakaPrepare 1.7 release.
2017-12-18 NIIBE YutakaUSB-USART improvement: flush buffer, send_break, use...
2017-12-18 NIIBE YutakaUSB-USART supports notification of serial error.
2017-12-17 NIIBE YutakaUSB-USART config setup support.
2017-12-16 NIIBE YutakaFix priority setting of USART (serial needs tight timing).
2017-12-16 NIIBE YutakaFix USART for overrun error.
2017-12-16 NIIBE YutakaRemove debug output for USART example.
2017-12-16 NIIBE YutakaFix usb-cdc.c in USART example.
2017-12-16 NIIBE YutakaFix timer expiration.
2017-12-16 NIIBE YutakaUSART fix handle_tx_ready, tweak priority of the sample.
2017-12-15 NIIBE YutakaFix USART README and Alternate input config.
2017-12-15 NIIBE YutakaFix USART rb_read.
2017-12-15 NIIBE YutakaFix USART driver.
2017-12-15 NIIBE YutakaAdd link for example-usb-serial.
2017-12-15 NIIBE YutakaModify USB<->USART example.
2017-12-15 NIIBE YutakaFix rough edges of USART driver.
2017-12-15 NIIBE YutakaRemove bb.c.
2017-12-15 NIIBE YutakaUSART access functions implemented.
2017-12-15 NIIBE YutakaUSART: Main implemented.
2017-12-15 NIIBE YutakaAdd ring buffer for USART.
2017-12-14 NIIBE YutakaAdd ChangeLog.
2017-12-14 NIIBE YutakaStart writing USART driver of STM32.
2017-12-14 NIIBE YutakaChange ADC setting of ST Nucleo STM32F103.
2017-12-14 NIIBE YutakaAPB -> APB1.
2017-12-14 NIIBE YutakaFix bb.
2017-12-14 NIIBE YutakaAdd bb.c, bb.h.
2017-12-14 NIIBE YutakaTesting loopback from ttyACM0 <-> ttyACM1.
2017-12-14 NIIBE YutakaRename serial->cdc for no confusion between USART.
2017-12-14 NIIBE YutakaNo line editing.
2017-12-14 NIIBE YutakaModification to support multiple serial lines.
2017-12-14 NIIBE YutakaAdd another interface.
2017-12-14 NIIBE YutakaIt's not TTY but USB to serial driver.
2017-12-14 NIIBE YutakaTry to support multiple serial lines.
2017-12-14 NIIBE YutakaCopied from example-cde (except README).
2017-11-24 NIIBE YutakaVersion 1.6. release/1.6
2017-11-21 NIIBE YutakaUpdate example-fsm-55.
2017-11-21 NIIBE YutakaForgotten example-led/stack-def.h.
2017-11-20 NIIBE YutakaUpdate example-led.
2017-11-20 NIIBE YutakaFix for Cortex-M0.
2017-11-18 NIIBE YutakaFix example-fsm-55.
2017-11-17 NIIBE YutakaMore change for clock setting.
2017-11-17 NIIBE YutakaMore clean up.
2017-11-17 NIIBE YutakaFactor out RCC definition into stm32.h (common for...
2017-11-17 NIIBE YutakaFix for MKL27Z.
2017-11-17 NIIBE YutakaUpdate example-fsm-55.
2017-11-17 NIIBE YutakaMCU specific sleep feature is now defined in MCU specif...
2017-11-17 NIIBE YutakaUpdate mcu/stm32f103.h.
2017-11-17 NIIBE YutakaFactor out mcu/cortex-m.h.
2017-11-17 NIIBE YutakaCall chx_sleep_mode change.
2017-11-17 NIIBE YutakaAdd MCU_STM32F1.
2017-11-16 NIIBE YutakaUse HSI clock on sleep mode for STM32F103.
2017-11-16 NIIBE YutakaOnly sleep mode can be used for USB suspend on STM32F103.
2017-11-16 NIIBE Yutakachopstx_poll: Use const pointer for the third argument.
2017-11-16 NIIBE YutakaFix for Cortex-M0.
2017-11-15 NIIBE YutakaUse event instead of interrupt (STM32F103 USB).
2017-11-15 NIIBE YutakaAdd INTR_REQ_USB_WAKEUP.
2017-11-15 NIIBE YutakaUSB driver for STM32F103 update for USB suspend/resume...
2017-11-15 NIIBE YutakaUse deep sleep API for example-fsm-55.
2017-11-15 NIIBE YutakaAdd chx_sleep_mode.
2017-11-15 NIIBE YutakaFix Cortex-M0 version.
2017-11-15 NIIBE YutakaFix example-fsm-55 and documentation.
2017-11-15 NIIBE YutakaSupport sleep on idle.
2017-11-15 NIIBE YutakaFix USB driver for STM32F103.
2017-11-14 NIIBE YutakaFix example-fraucheky.
2017-11-14 NIIBE YutakaSupport USB suspend/resume defined in USB 2.0 spec.
next